End panel layout – Orion Car Audio 3002 User Manual
Page 6
END PANEL LAYOUT
1.
Power LED - when lit indicates that the amplifier is on.
2.
Stereo/Mono Switch - configures the amplifier for one or two inputs.
3.
RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.
4.
Gain Control - continuously adjusts from 200mV to 5V for full power output.
5.
High-Level Input Connector - accepts input from head unit's speaker output.
6.
Crossover Switch - configures the front channel for high-pass, low-pass, or full
range operation.
7.
INTELLi Bass Control - continuously adjusts from 0 to 10dB of boost centered at
45Hz.
8.
Speaker Connections - accepts up to 12-gauge speaker wire.
9.
1 ATC Fuse - protects the amplifier from over current situations.
10. REM Remote Turn-on Input - turns on the amplifier when fed 12 V+.
11. Power Connections - accepts greater than 8 AWG power and ground cables.
5
©2003 Directed Electronics, Inc.