Omron Healthcare ZFX-C - Manual (Page 3)

4 5
Smart Recipe is on Omron's invention of 3-step setting procedure.
By adopting a new algorithm to encapsulate “human know-how”, the auto setup
for lighting and measurement now possible.
Anyone can rapidly perform a high level of image processing.
Smart
Recipe
The Built-in lighting camera and improved controller brings
about an even higher degree of automatic lighting. With this
camera you can produce up to a maximum of 1296 patterns of
reflective lighting making the chore of choosing lighting
equipment unnecessary. The lighting setup can be managed as
digital data so it is possible to store the optimal setup for each
job, and it smoothly handles the changing of settings. It is also
possible to fine-tune the customized setup can be added.
Built-in lighting camera that enables an advanced automatic lighting
Patent pending
Width measurement
Automatic lighting setup Customized lighting setup
Easily adjusts position
Basic operations merely through
selection of on-screen icons
Intuitive operations
Appropriate filters and edge scan directions
for width measurement can be automatically
set by analyzing the target image.
Select the suitable position
correction icon for
different tests Indicate each region
(red frame) of the
position correction. Press Auto key.
Obtain the width Indicate the region Press the Auto key
Step 1 Step 2 Step 3
With automatic lighting setup, user can simply select
the best image from thumbnail of candidate images. A more detailed set up is possible with the
customized lighting setup while looking at the image.
Pattern Sensiti
Area Hue
Position Width Count
2 model 1 model
Position Area
Defect
Bright
No position correction Position corrected
In response to the position
difference,
the measurement region is
automatically adjusted.
S m a r t s e n s o r
ZFX-C
Step1 Step2 Step3
Choose best lighting
The know-how and trial and error that have been indispensable and required much time
and effort up to now in lighting setup is now an automated process. By just selecting the
best one from the candidate images automatically captured by changing the lighting
pattern with the auto-lighting, anyone can easily find the optimal lighting. User can now
easily determine settings for shiny work with high degrees of reflection and black
monochrome work with low degrees of reflection, something very tricky before. In
addition, when a more detailed setup is needed, the customized setup can be used to
incorporate know-how.
Choose measurement icon
The measurement method can be specified by just choosing
the icon from out of a total of 9 measurement items for
different types of inspection.
3-step position correction
Even when the position of work changes due to the
conveyer condition, the excellent position correction
function can come into play allowing adjustment using
the work contours, two stage position correction and so
on. With the auto setup, position difference can be easily
adjusted to enable stable measurement.
Draw region, press and go
Just specify the region of interest and press Auto key and
the system will determine the most suitable parameters for
the target image.
Now anyone can easily perform a complex and advanced
parameter setting which used to require special knowledge
and cumbersome steps.
Customized setting is also possible by fine tuning the
parameters automatically set up. The time required to set up
parameters can be significantly reduced.