Oregon Scientific RMR232PHN - Manual (Page 3)

3
GB
A LED INDICATOR
Flashes when the remote unit transmits a reading
B BATTERY COMPARTMENT
Accommodates two UM-3 or AA-size 1.5V batteries
C BATTERY DOOR
D WALL-MOUNT RECESSED HOLE
Supports the remote until in wall-mounting
BEFORE YOU BEGIN
For best operation,
1. Insert batteries for remote units before doing so for the main
unit.
2. Place the main unit as close as possible next to the remote unit,
reset the main unit after installing batteries. This will ensure
easier synchronization between the transmission and reception
of signals.
3. Position the remote unit and main unit within effective
transmission range, which, in usual circumstances, is 20 to 30
meters.
Note that the effective range is vastly affected by the building
materials and where the main and remote units are positioned. Try
various set-ups for best result.
Though the remote units are weather proof, they should be placed
away from direct sunlight, rain or snow.
BATTERY INSTALLATION: MAIN UNIT
1. Slide open the battery compartment door.
2. Install 2 alkaline batteries (UM3 or “AA” size 1.5V) strictly
according to the polarities shown.
3. Press the [RESET] button.
4. Replace the battery compartment door.
BATTERY INSTALLATION: REMOTE UNIT
1. Remove the screws on the battery compartment.