Oricom TP68 - Manual (Page 10)

- Setting up -
10
3.12 Entering your local area code
Telephone numbers must always be stored in mobile phones with the dialling
code. If these numbers are then transferred to your telephone via the SIM card,
the dialling code can of course be omitted when making local calls. For this
purpose the telephone must know your local dialling code.
A. Please follow the instructions: Display shows:
Press the MENU button once. Add entry
Turn the Jog dial as far as the “Settings” message Settings
Confirm with YES. Clock
Turn the Jog dial until the “City code” message appears in
the display.
City code
Confirm with YES.
Note: A local dialling code already entered will not be
shown in the display. Number:
Now enter your own local dialling code without the zero. e.g. 2
Confirm with YES. Stored =>
City code
To exit programming mode, press the NO button twice.