Roger beep (rgb), Emergency channel (emg), Priority channel (pri) – Oricom UHF050 User Manual
Page 15: Operation
Operation
15
Roger Beep (RGB)
Roger beep emits a tone when you release the PTT switch.
To turn ON the roger beep
1. Press the
RGB button for 2 seconds, the
the display.
To turn OFF the roger beep
1. Press the
RGB button for 2 seconds, the
the display.
Emergency Channel (EMG)
The EMG button gives instant access to emergency channels 5 and 35.
To access the emergency channel
1. Press the
EMG button, Channel 5 I selected and displayed on the LCD.
2. If you press the
EMG button a 2nd time the channel changes to 35.
3. If you pres the
EMG button a 3rd time the unit return to the original
channel.
Priority Channel (PRI)
You can select a priority channel which is used during scanning functions
and can be accessed immediately via the INS button on the Microphone.
To Select the Primary Channel
1. Select the desired primary channel using the channel control, including
any CTCSS or DCS code.
2. Press the
PRI button on the unit or press and hold the INS button on the
Microphone.