Orion Car Audio CO500 - Manual (Page 3)

2 © 2009 directed electronics—all rights reserved
InsTallaTIon
The performance of the Cobalt coaxial speakers is directly proportional to the
quality of installation . Care taken during the installation process will be
rewarded with years of satisfying performance . If you are unsure about your
installation capabilities, please refer to your local authorized oRIon Dealer
for technical assistance . oRIon dealers are trained professionals dedicated
to obtaining the maximum performance out of your oRIon system . If
you decide to install this speaker system yourself, please read the entire
installation section before starting your installation .
Tools of THe TRaDe
listed are the majority of the tools required to perform the installation .
Having the proper tools will make the installation much easier . some of these
tools are required .
• marking pen • needle nose pliers
• wire crimpers • electric drill
• volt-ohm meter (opt.) • wire strippers
• 1/8" drill bit • wire cutters
• assorted tin snips • hole saw arbor
• Phillips screwdriver
• 43/4" (120mm) hole saw (5"Coaxial installation)
• 51/2" (140mm) hole saw (6" Coaxial installation)
WHaT’s In THe box
Included in this box are all the necessary mounting hardware and cables
for your basic installation . listed below is a detailed list of the components
included in this system package .
Quantity Description
1 Installation and operation Manual
1 Mounting template
2 Cobalt Coaxial speakers
2 Grills (except for 5x7)
Mounting screws