Oce North America TCS400 - Manual (Page 11)

Self support tips (GB) 11
Use the print modes to correct typical inkjet artefacts
[4] Use the print modes to correct typical inkjet artefacts
[4] Use the print modes to correct typical inkjet artefacts
When Then
Ink saturation causes the media to
cockle Set the 'Content mode' to 'Area fills'
The print contains regular horizontal
light or dark bands ■
Set the 'Print quality mode' to
'Presentation'
■ Set the 'Content mode' to 'Area
fills'
The filled areas contain white stripes ■
Set the 'Print quality mode' to
'Presentation'
■
Set the 'Content mode' to 'Area
fills'
The coloured lines are not well
aligned or blurred ■ Set the 'Print quality mode' to
'Presentation'
■
Set the 'Content mode' to ' Lines /
text'
The colour of one area or line runs
into the colour of another area or line Set the 'Print quality mode' to
'Presentation'
Parts of lines are missing or lines are
stepped Set the 'Content mode' to ' Lines /
text'
Parts of characters are missing Set the 'Content mode' to ' Lines /
text'
On high gloss photo paper the
individual ink drops merge on the
media Set the 'Print quality mode' to
'Release' or to 'Presentation'
The length and width measurements
are different from the original Set the 'Print quality mode' to
'Presentation'