How to use the stand – Optiquest QW22B VS11725 User Manual
Page 10

Install the Stand on a stable surface. The monitor may cause injury or damage if it falls
or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
The monitor is shipped with the stand detached. Be sure to attach the stand before operating the display
and remove if it is necessary to re-box.
HOW TO USE THE STAND
CAUTION
1.
beforehand to prevent the monitor from being
scratched. Lay the monitor flat on a table with
front face down.
2. The Stand-Bottom is pulled up as shown in
the figure.
3. Install the Stand-Base to the Stand-Bottom.
1.
beforehand to prevent the monitor from being
scratched. Lay the monitor flat on a table with
front face down.
2. Hold down the hooks outside and pull the
Stand-Base away from the Stand-Bottom.
Optiquest Q22wb