Appendix b – setting up a pin id and print control, Introduction, Connection arrangement – Oki S900 User Manual
Page 58: Introduction connection arrangement
APPENDIX B – SETTING UP A PIN ID AND PRINT CONTROL > 58
APPENDIX B – SETTING UP A PIN ID AND
PRINT CONTROL
INTRODUCTION
A printing limitation can be applied to every user via the PIN ID and the
Print Control Utility (option) of the C9300/C9500, and information
about printing jobs, e.g. total print count, can be acquired as log data.
The following conditions can be set:
l
Printing limitation can be applied to certain users.
l
Color printing limitation can be applied to certain users.
l
Printing limitation can be applied to every user.
l
Printing limitation can be applied to every section/department
l
Print logs can be acquired.
CONNECTION ARRANGEMENT
The S900 Scancopier is connected via an IEEE1394 cable (1) to the
C9300/C9500 printer which is connected via the network hub (2) to
the PC.
1
2