Oregon BPW128 - Manual (Page 5)

GB
5
DISPLAY-SYMBOL DESCRIPTION
Memory Mark
Weak Battery
Inflating Mark
Air releasing
Pulse Mark
INSTALLING BATTERIES
1. Slide battery cover off.
2. Install batteries first. Ensure
correct polarity.
Battery Type:
2 Alkaline LR03 (AAA)size
3. Replace the cover.
Replace the batteries if:
1. the weak battery mark appears
in the display
2. nothing appears in the display
when the power is switched on.
If not disposed of properly, batteries can be harmful.
Protect the environment by taking exhausted batteries
to authorized disposal stations.
Note:
When battery power is low, replace all the batteries.
Symbol Description Explanation
Appears when
measurement value is
recalled from memory
Appears when batteries
should be replaced
Appears when inflating
until pressure is enough
Appears when cuff air is
exhausting
Shows the pulse rate per
minute
AAA AAA