Sylvania SSL2606 - Manual (Page 31)

31
EN
OPTIONAL SETTINGS
HDMI AUDIO
Set the method of sound input for HDMI jack.
1 Display the setup screen.
• Press [SETUP].
The following setup screen is displayed.
2 Select “DETAIL” and press [ENTER] to confirm.
• Using [K /L], select “HDMI Audio” and press
[ENTER] to confirm.
3 Switch the HDMI Audio.
• Using [K /L], select the desired HDMI Audio,
then press [ENTER].
• Select “Auto” if you connected to both digital
device with HDMI jack and analog device for
audio sources. Digital audio input signal has
priority in this setting.
• Select “Digital” if you connected to digital
device with HDMI jack for digital audio input
signal.
• Select “Analog” if you connected to analog
device with analog jacks for analog audio input
signal.
4 To exit the setup, press [SETUP].
Detail Detail
Closed Caption
Auto
Digital
Analog
V–chip
HDMI Audio
Detail Detail
Auto
Closed Caption
V–chip
HDMI Audio
ENTER
STILL
SETUP
BACK
SCREEN
MODE
INFO
- 0
ENTER
SETUP