Onkyo CR-N7 - Manual (Page 37)

37
Listening to an FM/AM Station
First, program the stations into preset channels (see
pages 34 and 36).
Turn on the power to the unit before you start the proce-
dure.
1 Select FM or AM.
Press the INPUT
or button to
select FM or AM.
The channel selected most recently will
be recalled.
2 Turn MULTI JOG or press the dial
repeatedly to select the desired
preset channel.
Turn the dial counterclockwise to select
a lower channel number, or turn it clock-
wise to select a higher channel number.
1
2
Display
AUTO
SOURCE
FM ST
AUTO
SOURCE
FM ST
2
1
Using the remote controller
Adjusting the Antenna
1 2
Change the direction of the
antenna to determine the best
reception. Affix the antenna using a thumbtack.
(Do not press the thumbtack through
the antenna.)
Caution: Be careful not to prick your
finger!
Adjusting the AM antenna
Adjust the location and position of the
AM antenna while listening to an AM
broadcast to determine the best recep-
tion.
Adjusting and installing the FM antenna
Adjust the location of the FM antenna while
listening to an FM broadcast.