Oregon Scientific Wireless Weather Station With Temperature - Manual (Page 5)

EN
4
REMOTE SENSOR (THN132N)
�
GETTING STARTED
BATTERIES
Insert batteries before first use, matching the polarity (+
and -). Press RESET after each battery change.
indicates main unit batteries are low.
NOTE Do not use rechargeable batteries. We recommend
that you use alkaline batteries with this product for longer
usage and lithium batteries in temperatures below
freezing.
1. LED indicator 1. Wall mount
2. Battery compartment
3. Battery door
4. Table stand
5. RESET
6. CHANNEL switch
REMOTE SENSOR
The sensor collects temperature readings approx. every
40 seconds and sends them to the main unit. The main
unit can collect data from up to 3 sensors.
To set up the sensor:
1. Slide open the battery door.
�
�
�
�
�
�
P/N: 300100700-00009-10 REV1
6/100