Oracom PROFI MX160 - Manual (Page 22)

4. Table of Technical Parameters
Tab. 4.1: Table of technical parameters MX160
Tx: 154,725–159,725 MHz/159,325–164,325 MHz Frequency range
Rx: 159,325–164,325 MHz/154,725–159,725 MHz
200 kHz Channel spacing
software in range +3.2 MHz from base frequency Means of setting working frequency
better than -104 dBm Receiver sensitivity for BER 10
-3
0.1–25 W Software adjustable output power
133 kbit/s in 200 kHz channel Max. modulation rate for transmitting
Optional modules
ADIO (analog and digital inputs and outputs) slot 5
Ethernet 10/100 Mbps slot 4
2×RS232 slot 3
RS232 or galv.sep. RS232 or RS422/RS485 or GPS or M-
BUS or TPORT
slot 2
RS232 or galv.sep. RS232 or RS422 or GPS or M-BUS or
TPORT
slot 1
SMA + SMA Antenna connector
> 100 000 hours MTBF(Mean Time Between Failure)
13.8 V Supply nominal voltage
10.8–15.6 V Supply voltage range
420 mA + modules: (Eth. 30 mA, ADIO 50 mA, GPS 15 mA,
SCC 5 mA, M-BUS <100 mA, T-port 80 mA)
Idle consumption (Rx) *
5.5 A / 25 W Transmission consumption (Tx) *
2.5 mA Consumption in SLEEP mode
-25 to +55 °C Operating range of temperature
-40 to +85 °C Storage range of temperature
208Ч108Ч63 mm (71 mm DIN rail including)
Mechanical dimensions
184Ч108Ч63 mm (short version)
198×65 mm, ø 4.8 mm Spacing of fastening holes
1.3 kg Weight
* Approximate values dependent on frequency and modem type.
Tab. 4.2: Standards complied
ETSI EN 301 489-5 V 1.3.1 EMC (Electromagnetic Compatibility)
ETSI EN 300 908-9 V 1.1.1 (2002-01), ETSI EN 300 113-1
V 1.5.1 (2003-09) Radio parameters
CSN EN 60 950:2001 Electrical safety
UN Regulation No.10 (EHK No.10) Wheeled vehicle usage
Wideband modems – PROFI MX160 – © RACOM s.r.o. 22
Table of Technical Parameters