Oracom ORC-100 - Manual (Page 4)

- 4 -
@ INSTALLATION AND USE
■ TURNING ON/OFF THE POWER
° Press the ▷□ button on the ORC-100 to turn on the power.
Digital music/voice file will be played back after logo displaying.
° Press the ▷□ button on the ORC-100 for longer than 2 seconds to turn off the power.
If the unit is in the Stop mode for longer than 1 minute, it will power off automatically.
(Normal mode) (Watch mode)
Note) If the display panel is in watch mode, then, it converts into a watch display mode.
■ CONVERTING MODES
° Stop to playback and press the mode button.
It converts like Music mode → Voice mode/Voice mode → Music mode
(Music mode) (Voice mode)
■ PLAYING BACK DIGITAL MUSIC/VOICE FILES
° To playback - Press ▷□ button on ORC-100 in stop mode, and digital music/voice
will be played back.
° To stop - Press ▷□ button on ORC-100 in playback mode, and digital music/voice
will be stopped.
■ CONTROLLING VOLUME
° Control volume with volume control button( + - )on ORC-100 player.
Volume can be controlled in the range from 0 to 30.
Press the button briefly to control the volume by one level.
Press and hold button to control continuously
■ SEARCHING MUSIC/VOICE FILE
° To move desired music/voice file
- Press the ◀◀ button to move one track backward in the playback or stop mode.
- Press the ▶▶ button to move one track forward in the playback or stop mode.
Note) If the ◀◀ button is pressed within 5 seconds after a song started,
the previous song will be repeated.
If the button is pressed 5 seconds after the song started,
the current song will be repeated.
(For VBR files, the previous song won't be played even if the button is pressed within
5 seconds.)
For VBR files, the actually playtime may not match the playback time displayed on