Oki 70037301 - Manual (Page 9)

9
Check for Proper
Installation
1 On the printer control panel, press MENU
once or twice until INFORMATION MENU
appears on the display.
2 Press SELECT.
PRINT MENU MAP appears on the display.
3 Press SELECT.
The MenuMap prints.
4 Check the MenuMap printout:
• At the top of the printout you should see
"HDD:5.00 GB"
• In the right column you should see a new
menu section entitled DISK
MAINTENANCE
5 If you do not see these, remove the control
board, lift the hard drive handle and check to
be sure that the hard drive is firmly inserted in
the connector. Then reinstall the control board
and print the MenuMap again.