Onkyo DR-645 - Manual (Page 10)

10
En
Caution
• Turn the power off to all components before making
connections.
• Read the instructions of each component you intend to
use with this unit.
• Be sure to insert each plug securely. To prevent hum and
noise, avoid bundling the signal interconnection cables
together with the AC power cord or speaker cables.
Digital audio output jack
Digital audio from DVD-Video, CD and Video CD is
output from this jack. Connect an amplifiers including a
decoder, or digital audio components such as CD recorder,
etc. to this jack using commercially-available coaxial
digital audio cable.
• Select “ALL” or “PCM only” in the “DIGITAL
AUDIO SETUP”.
LINE 1 IN/LINE OUT jacks
Analog 2-channel audio signal is input or output from
these jacks. Connect a cassette tape deck etc. to these
jacks using commercially-available RCA cables.
Make sure to connect:
• white plug: white jack (L: left channel)
• red plug: red jack (R: right channel)
Power cord receptacle
After all other connections have been made, insert the
supplied AC power cord into this receptacle, then connect
the other end of the power cord into the wall socket.
• In order to avoid the risk of electric shock, fire, and so
on, only use the supplied power cord.
• If you are not going to use the unit for some time,
disconnect the power cord from the wall socket.
Connection to Audio Components etc.
RCA coaxial digita
l
audio
cab
le
RCA audio cab
le
Digital audio component
(CD recorder,
MD deck, etc.) Cassette tape
deck, etc.
To AC wall outlet