Sylvania SIP3019 - Manual (Page 5)

PREPARATION FOR USE
Power Sources
Power the unit by connecting it to a standard AC outlet (120V ~ 60Hz) via the attached
AC adaptor.
Changing the Remote Battery
WARNING:
Danger of explosion if the remote control’s
batteries are incorrectly installed. Replace only with the same or
equivalent battery.
a. Push the Release Button and pull out the Battery
Compartment to access the battery.
b. Replace the old battery with an equivalent new battery (CR
2025).
c. The positive side of the battery, as indicated by a plus symbol,
must be facing up when inserted into the remote.
4