Oregon Scientific DS6628 User Manual

Page 10

.........................................................................................................................

English

Portugu

Fran

ais

Deutsch

Italiano

Espa

English

Portugu

Fran

ais

Deutsch

Italiano

Espa

English

Portugu

Fran

ais

Deutsch

Italiano

Espa

English

Portugu

Fran

ais

Deutsch

Italiano

Espa

PC Connection

PC does not recognize the

Check the USB cable

Make sure both ends of the USB

camera.

connection.

cable are connected.

Interference from other

Disconnect other USB devices

USB devices.

from the PC.

Check computer

Connect the camera to the PC
with the USB cable and select
[My Computer]

[Control Panel]

[System]

[Device Manager].

In the [Device Manager] window,
delete [Compose USB device] or
[Unknown device] in [Other
devices]. Then disconnect the
camera and install the software
before reconnecting the camera
to the PC.

Camera

Electrostatic discharge

Check if the camera is

Turn off the camera, and then turn

malfunctions

interfered with the camera.

connected to the PC.

it back on. If connected to the PC,

during use.

disconnect the camera from the
USB cord, and turn it off then on again.

Everything on

Camera firmware defect.

Synch firmware with PC.

If the “Camera firmware is out of

the LCD flashes

sync. Update recommended.

and “ 7” or “ 8”

Update firmware?” message

is displayed.

appears when you connect the
camera to your PC with the USB
cable, click the [Yes] button and
update your firmware.

Problem

Symptom

Check This

Remedy

FLASH MODULE

Type

Description

Effective Distance

1 to 2 meters

Power Supply

1.5V AAA-size alkaline battery x 1

Dimensions

55 x 22 x 12 mm (width x height x depth)

Unit weight

Approx. 38g (1.3oz.)

Microsoft and Windows are trademarks of the Microsoft Corporation of the United States and other countries.
Windows is an abbreviated term referring to the Microsoft Windows Operating System.

Macintosh is a registered trademark of Apple Computer, Inc.

CompactFlash and CF are trademarks of SanDisk.

Arcsoft Impression and Arcsoft Impression logo are registered trandemarks of Arcsoft Inc.

Autobrite is a registered trademark of SMaL Camera Technologies Inc., Cambridge, Mass., USA.

Visit our website (www.oregonscientific.com) to learn more about your digital camera and other Oregon
Scientific products such as hand-held organizers, alarm clocks, and weather stations. The website also includes
contact information for our customer service department, in case you need to reach us.

MAIN UNIT

Type

Description

Image Sensor

CMOS sensor with Autobrite

technology.

Total number of pixels: 1.3 millon

Image Size

Selectable from:
SXGA: 1280 x1024 pixels
VGA: 640 x 480 pixels

File Format

JPEG (converted when images are downloaded using the enclosed software).

Lens

F = 3.2, f=6.87mm (equivalent to 47mm on a 35mm camera)

Focus

Fixed

Focal Range

60cm ~

∞

(infinity)

Sensitivity

Equivalent to ISO100

Flash Distance

Approx. 0.8m ~ 2m

Finder

Optical

White Balance

Autobrite

Shutter Speed

Automatic (1/30 - 1/15000 sec.)

Operation Environment

Temperature: Approx. 0

C ~ 40

C (32

F to 104

Humidity: 80% or less (no condensation)

Internal Memory

16MB non-volatile flash memory

Storage Media

SD Memory Card

Digital Output

USB 2.0 interface to PC

Windows Software

Oregon Scientific Photo Album

Product Dimension

86 x 54 x 8 mm (width x height x depth)

Unit Weight

Approx. 40g (1.4oz.)
(including battery, not including accessories)

Battery Specification

Lithium-polymer battery (rechargeable, non-removable)

No Power

Power will not turn on.

Batteries are exhausted.

Recharge the batteries (

P.18)

Taking Pictures

Cannot take pictures when

Camera is not turned on.

Turn on the camera.

the Shutter Release Button

No space on the SD

Delete unwanted files (

P.13)

is pressed.

Memory card / Internal

or insert a new SD Memory card

Memory

(

P.9)

The Auto Power-Off function

Switch the camera on.

has switched the camera off.

Camera will not focus.

Subject is not in the center

Move the subject to the center

of the Lens Viewfinder.

Check your current Focus

Switch from your current Focus

Mode.

Mode to either the Macro or the
Scene Mode.

Flash does not go off as

Flash is not turned on.

Switch on the Flash Module.

expected.

Flash has not finished

Wait until the Flash icon is

charging.

displayed again (

P.11).

Image taken appears too

The camera or subject was

Hold the camera firmly.

dark or blurred.

moving when the shot
was taken.

The subject is too near.

Use the Macro Mode (

P.11)

or move away from the subject.

The lens is dirty.

Clean the lens with a soft cloth (

P.4).

The pop-up lens is skewed.

Take care to pop the lens up
correctly so that it is not skewed.

Problem

Symptom

Check This

Remedy

TROUBLESHOOTING

SPECIFICATIONS

TRADEMARK INFORMATION

ADDITIONAL RESOURCES