Optimus MICRO-37 - Manual (Page 11)

11
Follow these steps to power the Micro-37
from standard AC power.
1. Set the AC adapter’s voltage switch to
3V.
2. Attach the 2.35 mm outer diameter/0.7
mm inner diameter barrel plug to the
AC adapter’s cord with the tip set to
positive (+).
3. Insert the barrel plug into the Micro-
37’s DC3V jack. This disconnects inter-
nal batteries.
4. Plug the other end of the AC adapter
into a standard AC outlet.
RadioSnack
MIC
DC3V
14-1164.fm Page 11 Wednesday, November 25, 1998 1:20 PM