Onkyo HT-S5300 - Manual (Page 19)

19
En
This section explains how to connect the supplied indoor FM antenna and AM loop antenna.
The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use
the tuner.
Caution
• Be careful that you don’t injure yourself when using thumbtacks.
Note
• Once your AV receiver is ready for use, you’ll need to tune into a radio station and position the antenna to achieve the best possible
reception.
• Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.
Tip
• If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.
• If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM
antenna.
Connecting Antenna
Thumbtacks, etc.
Insert the plug fully
into the jack. Insert the plug fully
into the jack.
North American models Asian models
Push. Insert wire. Release.
Assembling the AM loop
antenna
Indoor FM antenna (supplied) AM loop antenna (supplied)