Oregon Scientific 3.0 MEGA-PIXEL DIGITAL CAMERA WITH JUMBO DISPLAY PV 100 - Manual (Page 22)

EN
The ISO setting affects the camera's
sensitivity to light.
NOTE: An image taken at higher ISO
speeds may contain more "noise" or
graininess than an image taken at lower
speeds.
ISO
MENU OK
SPEED DESCRIPTION
The camera sets the speed automatically (default
setting)
ISO rating 50. Use for very brightly lit scenes
ISO rating 100. Use for brightly lit scenes
ISO rating 200. Use for normally lit scenes
EV (EXPOSURE COMPENSATION SETTING)
Exposure compensation is required
w h e n t h e r e i s a n e x t r e m e
difference in brightness between
the background and the subject.
Use this setting to manually
brighten or darken an image.
Default setting is 0.0.
+2.0 / + 1.7 / +1.3 / +1.0 / +0.7 / +0.3 / 0.0 / -0.3 /
-0.7 /-1.0 / -1.3 / -1.7 / -2.0 EV
SHOOTING MOVIES
The Movie Mode enables you to take movies. The length of the movie
that can be taken depends on the amount of memory available within
your camera's current memory storage.
18
PV100 Eng R7 a OP 9/9/04, 2:45 PM 19