Optimus CTR-107 - Manual (Page 21)

21
OUT — immediately begins recording when you
press RECORD (unless PAUSE is pressed down).
3. Press RECORD to begin recording. Both PLAY
and RECORD lock down. As the recorder
records, the RECORD/BATT indicator flashes.
Notes:
• If VOICE ACTIVATION is set to HIGH or LOW ,
recording begins when the recorder detects
an audible signal. If the sound stops or
becomes inaudible for about 5 seconds, the
recorder automatically stops. The recorder
automatically starts recording again when the
recorder receives another audible signal.
• If you press and hold down REVIEW/REWIND
or CUE/FAST-F while recording, the RECORD
button releases and the tape rewinds or fast-
forwards. You can hear the recorded sound so
you can locate any desired segment on the
tape. When you release
REVIEW/REWIND or
CUE/FAST-F , the recorder plays the cassette.
To continue recording, press STOP/EJECT ,
then press RECORD .
• To temporarily stop recording, press PAUSE .
Press PAUSE again to resume recording.
14-1112.fm Page 21 Thursday, July 1, 1999 1:05 PM