Oreck ProShield Air Purifier - Manual (Page 15)

12
Problem Check Solution
Odor Absorber
light on unit has
turned red. Odor Absorber • Replace odor absorber if desired.
• If odor absorber is not replaced, remove
old odor absorber to turn off Check Odor
Absorber light.
Does not
remove odor. Odor Absorber • Vacuum odor absorber with a soft brush
attachment if dirty. Do not use any liquids
to clean the Odor Absorber.
• Replace odor absorber if desired.
Unit still does
not operate
properly. Check all the
above points. Contact Oreck for service.