Amplified trumpet, Amp-04trp – amplifier 04trp – speaker – OWI AMP-04TRP User Manual
Page 2
MODEL NUMBER
AMP-04TRP
POWER
25 Watts
FREQUENCY RESPONSE
20 Hz to 30kHz +0-2dB
NOISE FLOOR
Better than 90 dB
DISTORTION
Better than .1% at 10 Watts
INPUT
Line Input -10 to +4dB
INPUT CONFIGURATION
Differential, Balanced and DC Isolated
VOLUME CONTROL
Step for Mechanical Level Memory
PROTECTION
Short Circuit, Heat and Over Current
MAXIMUM POWER SUPPLY
400 Ft. with 16 Gauge Wire
WIRE LENGTH
COLOR
White
MULTIPLE AMPLIFIERS
Yes, Line Input in Parallel
EACH AMPLIFIER MAY POWER
Four Speaker Total per Amp
INPUT / OUTPUT
Each Amplifier has a Line Level
Input and Output
CONNECTOR TYPE
Phoenix Connector
CONDUIT ENTRY
Two
1
/
2
" Conduit Access Holes
with Knock Outs
TYPICAL LINE LEVEL SOURCES
CD Player, Audio Mixer, Background
Music Service, Telephone PBX Dry Audio Pair
Hooked to the Balanced +,- Input. There is
No Shield on a Telephone Input.
HOOK UP FOR ADDITIONAL HORNS
Wired through the Conduit Entry,
Use the 4 Way Binding Posts for Additional
High Level Speakers Hooked up to the Amplifier.
FOR FOUR HORNS
Wire them Series Parallel to Achieve a
4 Ohm Load Impedance
POWER SUPPLY
12 Volts
WARRANTY
1 Year
ARCHITECTS AND ENGINEERS
SPECIFICATIONS / TECHNICAL DATA
AMPLIFIED TRUMPET
GENERAL SPECIFICATIONS
www.owi-inc.com
OWI, Inc.
17141 Kingsview Ave.
Carson, CA 90746-1207
Tel: 310.515.1900
Fax: 310.515.1606
The optional amplifier is housed in an all metal cap with electronics inside. It resembles the original plastic cap but with metal to allow
a convenient heat sink for the internal amplifier. While an AC 12 Volt power supply is provided, it is capable of being powered by a DC or
AC power supply with a voltage not to exceed 16 volts. A power supply of up to 4 amps is suitable. The amplifier accepts a balanced
audio input for maximum noise rejection. It has a high quality powder coat providing maximum durability. The power kit comes with
mounting screws to replace the existing plastic cover plate of the Trumpet Speaker (04-TRP).
MODEL NUMBER
04-TRP
SYSTEM TYPE
Full Range
SPEAKER DRIVER
4" Polypropylene Coated
OUTDOOR / INDOOR
Yes
FREQUENCY RESPONSE
MUSIC
140 Hz – 20 kHz
SPEECH
250 Hz – 3 kHz
CROSSOVER
4 kHz
IMPEDANCE
4 Ohms
SENSITIVITY (1W, 1M)
90 dB
POWER HANDLING
80 Watts Max
40 Watts RMS
DISPERSION COVERAGE
120° H x 90° V
ENCLOSURE
ABS Plastic
GRILL
Aluminum
OPERATING TEMP.
14° F to 176° F
(-10° C to 80° C)
DIMENSIONS: HWD
5.9" H x 9.8" W x 10" D
PRODUCT WEIGHT
4.98 Lbs. (2.26 kG)
THROW (DISTANCE)
60 Feet
COLOR
Paintable White
MOUNTING HARDWARE
Unique "C" Bracket
(Included)
TERMINAL COVER PLATE (Included)
SECURITY CABLE
(Included)
PAINTABLE
Yes
WARRANTY
5 Years
AMP-04TRP – AMPLIFIER
04TRP – SPEAKER
Silencer
Options Available:
Silencer AMP-MOVC (Mono Volume Control)
Silencer AMP-STVC (Stereo Volume Control)
Amplifed Trumpet AMP-04TRP