Replacing the hepa filter – Oreck 1600 User Manual

Page 14

Text mode
Original mode

Replacing the HEPA Filter

The HEPA filter should be replaced every six months, or more
often if the vacuum is used to pick up fine particles or in
extremely dirty areas.

To replace the HEPA door:
1. Push down on tab of the HEPA filter door.
2. Pull the door out of its slot.
3. Slide the HEPA filter up and out of the door.
4. Insert a new filter by aligning the slots on the side of the

filter with the tabs on the inside of the filter door.

5. Place the HEPA filter door assembly back into the slot and

rotate the door up until it snaps into place.