Orion Car Audio CO104SBX - Manual (Page 2)

© 2009 Directed Electronics—All rights reserved. 1
IntroDuctIon
thank you for your purchase of the orion vented subwoofer enclosure system from
Directed Electronics. the orion vented subwoofer enclosure system will excite and
delight the auto sound enthusiast with years of high quality audio reproduction.
orion vented subwoofer enclosure systems are covered by a limited warranty. Be sure
to retain your original sales receipt, and refer to the warranty section on the back
cover of this guide for full details about your coverage.
PrActIcE SAfE SounD™
High-powered car audio systems may produce sound pressure levels that
exceed the threshold at which hearing loss may result. they may also impair a
driver’s ability to hear traffic sounds or emergency vehicles. use common sense
and practice safe listening habits when listening to or adjusting your audio
system. If your subwoofer enclosure is installed in the passenger compartment, make sure
it is restrained from moving in case of an accident.
Your ProDuct InformAtIon
model number:
Date of Purchase:
InStAllAtIon
Place the speaker assembly in your vehicle. common placement will normally be 1.
the trunk, back seat, or back of a van.
connect each speaker to an amplifier output (not supplied), observing that the 2.
polarity markings on the back of the speaker enclosure are connected to the
corresponding polarities on the amplifier.
NOTES:
Do not use an amplifier that can drive the speakers beyond their specifications. •
leave at least three inches of clear space in front of the port(s) and woofer(s) to •
allow for adequate air flow and woofer movement without obstruction. orienting
the woofers toward the rear of the vehicle will in most instances enhance the bass
performance.
WARNING: loose objects can become projectiles in the event of a rapid
deceleration, abrupt turn or accident. Secure the enclosure in place with the
mounting brackets provided to prevent it from shifting.