Olympus DS-4000 - Manual (Page 16)

1
16
Turning ON the Recorder
T
urning ON the Recorder/ Power Save Mode
With the battery charged in the recorder and the card
inserted properly, the recorder is ready to work.
While the power switch on the back of the recorder is in
the OFF position, none of the buttons or switch on the
recorder will be active. Slide the power switch to the ON
position to activate the recorder.
Power Save Mode
When the recorder is ON but not in use for 10 minutes, by default, it will switch to power save mode
automatically. To reactivate the recorder again, press any of the buttons on the recorder.
POWER
ON OFF