Oregon Wireless Thermo-Hygro Clock RMR616HGA - Manual (Page 11)

EN
10
TEMPERATURE AND HUMIDITY
This product can display current, minimum, and
maximum temperatures and humidity percentage
information collected by the remote sensors.
Data is collected and displayed every 40 seconds.
SELECT TEMPERATURE UNIT
Slide the
°
C /
°
F switch into the desired location.
The switch is located in the battery compartment. The
setting for the main unit overrides the remote sensor
setting.
SELECT SENSOR CHANNEL
Press CHANNEL to switch between sensors 1 - 3.
The icon shows the selected sensor.
SELECT MEASUREMENT UNIT
ACTIVATE ALARM
Press ALARM to switch to Weekday or Single Alarm
view. To activate or deactivate the alarm, press UP or
DOWN.
• Alarm deactivated: --:--
• Alarm activated: Alarm time is shown
The bell icons W and S indicate the alarm display
mode selected.
SILENCE ALARM
When the Alarm time is reached, the crescendo alarm
will sound for 2 minutes. Press ALARM to silence it.
The Weekday Alarm will sound at the same time the
next day provided the next day is Monday - Friday. The
Single Alarm will not sound unless you manually activate
it again.
Indoor
Display
Designat-
ed
Display Remote
Display
Channel 1
Kinetic-
wave
Icon
Remote
Display
Channel 2
Remote
Display
Channel 3
RMR616HGA lab test R2 1/17/04, 5:03 PM 10