OK International DX-250 - Manual (Page 4)

7
8 MAINTENANCE
The dispenser is designed and built to be relatively maintenance free. To assure
trouble free operation, the following recommendations should be followed:
1. Make certain air supply is clean and dry.
2. Avoid turning barrels upside down or laying barrel so that material may
run through air line to internal components.
3. Avoid connecting the unit to excessive moisture or solvent saturation.
4. Avoid connecting air supply exceeding 100 psi (6.9 bar)
5. Use only Amyl Alcohol to clean outside surface of the main housing.
6. Use only soft cloth to clean the LCD.
9
SPARE PARTS AND ACCESSORIES
For DX-3xx/2xx spare parts and accessories information, please visit the DX-
3xx/2xx User Guide webpage at http://www.okinternational.com
10 LIMITED WARRANTY
OK International warrants this product to the original purchaser for a period of one
(1) year from date of purchase to be free from material and workmanship defects but
not normal wear-and-tear, abuse and faulty installation. Defective product or
subassembly and components under warranty will be repaired or replaced (at OK
International's option) free of charge. Customer with defective product under
warranty must contact the nearest OK International office or distributor to secure a
return authorization prior to shipping the product to the assigned OK International
authorized service center. For nearest OK International office or distributor contact
information, please visit www.okinternational.com. OK International reserves the
right to make engineering product changes without notice.
11 I/O Configuration and End of Cycle Switch
For DX-3xx/2xx I/O Configuration and End of Cycle Switch information, please
visit the DX-3xx/2xx User Guide webpage at http://www.okinternational.com
2
目录
页码
1 安全信息.....................................................................................2 - 3
2 符号定义.....................................................................................3
3 规格说明.....................................................................................4
4 特色............................................................................................5
5 连接设备.....................................................................................6
6 设置说明.....................................................................................6-7
7
故障排除.....................................................................................7
8
维护............................................................................................8
9
备件和附件 .................................................................................8
10
保修............................................................................................8
11 I/O
配置和循环结束开关 .............................................................8
1 安全信息
1.1 用途：
警告：除“用户指南”中介绍的使用方法之外，以其它任何方式使用此设备均可
能会造成人身伤害或财产受损。请务必按照“用户指南”中的方法使用此设备。
OK International
对因设备的非规定应用所造成的人身伤害或财产受损概不负
责。以下行为可能导致非规定应用：
• 更换为“用户指南”中并未推荐的设备
• 使用不兼容或已损坏的更换件
• 使用未经验证的附件或辅助设备
1.2 安全注意事项：
• 操作此设备时切勿超过最大额定功率/设置