Oregon Scientific Slimline Weather Station BAR988HG User Manual

Page 13

SWITCH

OPTION

Channel

If you are using more than one
sensor, select a different channel
for each sensor.

Radio Signal
Format

EU (DCF) / UK (MSF)

4. Press RESET. Then set the temperature unit.

SWITCH

OPTION

Temp

°C / °F

To fold out the stand:

For best results:

• Insert the batteries and select the unit, channel,

and radio signal format before you mount the
sensor.

• Place the sensor out of direct sunlight and

moisture.

• Do not place the sensor more than 70 metres

(230 feet) from the main (indoor) unit.

• Position the sensor so that it faces the main

(indoor) unit, minimizing obstructions such as
doors, walls, and furniture.

• Place the sensor in a location with a clear view to

the sky, away from metallic or electronic objects.

• Position the sensor close to the main unit during

cold winter months as below-freezing
temperatures may affect battery performance and
signal transmission.

The RTGR328N Sensor collects temperature and
humidity readings, and signals from official time-keeping
organizations for the radio-controlled clock.

SET UP THERMO / HYGRO SENSOR (RTGR328N)

1. Open the battery compartment with a small Phillips

screwdriver.

2. Insert the batteries.

3. Set the channel and radio signal format. The switches

are located in the battery compartment.

5. Close the battery compartment.

BAR988HG English R5 OP

8/20/04, 11:25 AM

Black