Remote control – Hyundai H-TV2100 User Manual
Page 6
6
Remote control
POWER
Power (Stand By) button
Press this button to tern the TV on/off. Press any Number PROG-, PROG+ Button,
picture and sound will come on within a few seconds.
MUTE
Mute button
Press once to mute the sound, press again to return to previously set sound level.
SYS
Sound system button
Press this button to select the correct sound system.
5.5M 6.0M 4.5M 6.5M
0-9
-/--
Program selection button
Push the number for your desired program and the program indicator will be displayed
on the screen. Press -/-- key to select one digit or two digit entry, to select program 0-
9, use one digit entry, to select 10-99 use two digits entry. Press number key 0-99 for
program selection. Press the number keys to select Teletext pages in Teletext mode.
PROG +/-
PROG-, PROG+ button
Press the PROG+ button to select the program forwards. Press the PROG- button to
select
the
program
backwards.
(Use
this
button
for
page up/down
to
increase/decrease page number in Teletext mode.)
VOL+/-
Volume up/down buttons
Press volume up/down buttons to adjust sound level.
P.P.
Personal presets button
You can select DYNAMIC, MILD, COLORFUL, STANDARD and CUSTOM by
pressing this button.
Recall button
Press this button sequentially to recall for the program number, color system and
sound system on the screen.
SLEEP
Sleep button
This key is used to set the sleep timer in 15 minutes step up to two hours. When the
preset time runs to 0. TV set will go into stand by mode. To switch off this function,
press this key step by step until
is displayed on the screen.