Optimus SCR-63 - Manual (Page 10)

10
Note: Press PAUSE on Deck 2 to
temporarily stop recording. Press
PAUSE again to resume recording.
6. When you are finished, press
STOP/EJECT on Deck 2 to stop the
tape. RECORD and PLAY release.
Note: The deck automatically stops
when the tape reaches the end.
Dubbing (Copying) a
Cassette Tape
You can easily copy a tape by playing
it in Deck 1 and recording it onto an-
other tape in Deck 2.
Follow these steps to copy a cassette
tape.
1. Load a blank tape, or one you
want to record over, into Deck 2.
2. Load the tape you want to copy
into Deck 1.
3. Set DUBBING MIC/NORM/HIGH to
NORM (to record at normal speed)
or HIGH (to record at twice the
normal speed).
4. Set TAPE (POWER OFF)/RADIO to
TAPE (POWER OFF) .
5. Press PAUSE then RECORD on
Deck 2. RECORD and PLAY both
lock down.
6. Press PLAY on Deck 1 to begin
copying. PAUSE on Deck 2 auto-
matically releases.
Notes:
• You can listen to the tape play-
ing in Deck 1 as you copy it.
Adjust
VOLUME to the desired
listening level. (Adjusting VOL-
UME does not affect the record-
ing level).
• The tape’s sound is distorted if
you set DUBBING MIC/NORM/
HIGH to HIGH and listen to the
tape playing in Deck 1 as you
copy it.
• To temporarily stop recording
on the tape loaded in Deck 2,
press
PAUSE on Deck 2. The
tape in Deck 2 stops, and the
tape in Deck 1 continues to
play. Press
PAUSE on Deck 2
again to resume recording.
14-703.fm Page 10 Wednesday, June 30, 1999 4:56 PM