Sylvania DVL245G - Manual (Page 11)

-11- EN
1
Press [SEARCH MODE]
repeatedly until the Time
Search display appears
during playback.
2
Press the desired time
location on the disc, using
the Number buttons within
0 seconds.
1
Press [SEARCH MODE] repeatedly until the marker display
appears.
2
Use [s / B] to select
markers.
3
Playback will restart from
the specific point which
you have set as the
desired marker.
ENTER ENTER
1:29:00 TOTAL
1
Press [SEARCH MODE] repeatedly until the marker display
appears during playback.
2
Use [s / B] to select the
markers.
3
Press [ENTER] to set the
markers.
Using Time Search
1:29:00 TOTAL
Hint
• When there is no need to enter a number, “0” appears automati-
cally.
For example, “0 : 0 - : -- ” appears in the Time Search display if the
total time of the title or track is less than 10 minutes.
• Press [CLEAR] to erase the incorrect input at step 2.
1 2 3
4 5 6
7 8 9
0
This feature allows you to assign a specific point on a disc to be
called back later.
To set a marker
ENTER ENTER
1
Press [RETURN ] to exit the marker display.
RETURN
SEARCH
MODE
Hint
• Opening the disc tray or putting unit in standby mode will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To return to the
marker later” will also erase all markers.
• To clear a marker, select the marker to be cleared at step 2 in the section “To
set a marker” or “To return to the marker later,” and then press [CLEAR].
• The marker display will disappear in about 0 seconds when there is no out-
put.
Search Function
To return to the marker later
Functions
To exit the marker display
SEARCH
MODE
PLAY
STOP
Marker Setup
ENTER
ENTER
SEARCH
MODE
PLAY
STOP
DVL245G_E6AC0UD.indd 11 2006/01/10 11:00:21