Oregon Scientific Weather System Pro BAR629HG - Manual (Page 7)

7
EN
MINIMUM / MAXIMUM RECORDS
Press MEMORY to toggle between current, maximum
(MAX) and minimum (MIN) records. To clear the records,
press and hold MEMORY for 2 seconds. A beep will
sound to confirm that the memory has been cleared.
MOON PHASE
The Calendar must be set for this feature to work, see
"Set Clock" section.
• Press or to view the moon phase for the next
or previous day.
• Press and hold or to scan quickly through the
years (2001 to 2099).
BACKLIGHT
Press SNOOZE / LIGHT to activate the backlight for 8
seconds.
RESET SYSTEM
The RESET button is located behind the front button
panel for the main unit. Press RESET when you change
the batteries and whenever performance is not behaving
as expected (for example, unable to establish radio
frequency link with remote sensor or clock).
SAFETY AND CARE
Clean the product with a slightly damp cloth and alcohol-
free, mild detergent. Avoid dropping the product or
placing it in a high-traffic location.
WARNINGS
This product is designed to give you years of service if
handled properly. Oregon Scientific will not be responsible
for any deviations in the usage of the device from those
specified in the user instructions or any unapproved
alterations or repairs of the product. Observe the following
guidelines:
• Never immerse the product in water. This can
cause electrical shock and damage the product.
• Do not subject the main unit to extreme force,
shock, or fluctuations in temperature or humidity.
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of
different types.
• Do not use rechargeable batteries with this product.
• Remove the batteries if storing this product for a
long period of time.
• Do not scratch the LCD display.
NOTE The technical specification of this product and
contents of this user guide are subject to change without
notice. Images not drawn to scale.
TROUBLESHOOTING
PROBLEM SYMPTOM REMEDY
Calendar Strange date / Change language
month (➔5)
Clock Cannot adjust clock Disable clock (➔5)
Cannot auto- 1. Adjust batteries
synchronize the (➔4)
date and time 2. Press RESET
(➔7)
3. Manually activate
clock feature (➔5)
Temp Shows “LLL” or Temperature is
“HHH” out-of-range
Remote Cannot locate Check batteries(➔4)
sensor remote sensor Check location (➔5)
Cannot change Check sensors. Only
channel one sensor is
working (➔5)
Data does not Initiate a manual
match main unit sensor search (➔5)
SPECIFICATIONS
MAIN UNIT DIMENSIONS
L x W x H 142 x 63 x 158 mm
(5.5 x 2.5 x 6.2 inches)
Weight 296 g (10.4 ounces)
without battery
REMOTE SENSOR DIMENSIONS
L x W x H 92 x 60 x 20 mm
(3.6 x 2.4 x 0.79 inches)
Weight 63 grams (2.22 ounces)
without battery
TEMPERATURE
Unit
°
C /
°
F
Indoor range -5
°
C to 50
°
C
(23
°
F to 122
°
F)
Outdoor range -20
°
C to 60
°
C
(-4
°
F to 140
°
F)
Resolution 0.1
°
C (0.2
°
F)
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent