Onkyo C-707CHX - Manual (Page 9)

9
Befor
e Using
Connections
Other Information
Operations
RATING:
AC120V 60Hz 14W
2-1, NISSHIN-CHO, NEYAGAWA-SHI,OSAKA,
JAPAN
MADE IN JAPAN
MODEL NO. C-707CHX
COMPACT DISC CHANGERR
AC OUTLET
AC 120V 60Hz
UNSWITCHED
120W 1A MAX.
R
L R
OPTICAL
1 2
DIGITAL OUTPUT
L
R
ANALOG
OUTPUT
REMOTE
CONTROL
1 Connecting to an amplifier
Connect the CD’s OUTPUT jacks and the amplifier’s CD input jacks using the audio connection cable.
Refer to the amplifier’s instruction manual for connections.
2 Connection to digital equipment, such as an MD,CD Recorder or DAT
Using the DIGITAL OUTPUT connector, you can record on digital audio equipment, such as an MD, CD
recorder, DAT, etc. For digital recording, connect the equipment to either DIGITAL OUTPUT OPTICAL 1
or 2 connector using the optical cable (option). These connectors can also be used for connecting an
amplifier which is equipped with a digital input connector.
A connector protection cap is attached to the digital output connector. Remove
this cap to connect the unit to other digital equipment. When you are not using
the digital output connector, replace this cap.
3 To AC OUTLET (UNSWITCHED)
The AC power cord of another component can be connected to this AC OUTLET connector.
This means that if the C-707CHX is plugged into an AC outlet, AC power is available to this AC OUTLET
even if the C-707CHX is off.
Note
The shape, number, and total capacity of the AC outlets may differ depending on the area where the
unit is purchased.
120 V, 60 Hz model: Capacity is 120 W in total.
Connecting to the other components
Before connecting
• Do not connect the AC power cord (mains lead) until you complete all the other connections includ-
ing the connections on the next page.
• On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a
white connector (marked L) to the left channel. Connect white plugs of audio connection cables to
L connectors and connect red plugs of audio connection cables to R connectors.
Improper connection
Insert completely
Audio connection cable
(White) To L connector
(Red) To R connector
To L connector (White)
To R connector (Red)
jacks
Amplifier without digital
input terminal MD recorder, CD recorder,
DAT deck, etc.
To wall outlet
AC outlet
Optional Optical fiber
cable
DIGITAL IN
Audio
connection
cable
CD
cable
1 2
3