RCA LDK 200 - Manual (Page 24)

4-2 Operator's Manual LDK 200 - Multi-role Digital Camera Head Location of Controls and Functions
Clear
Clear
A 1
Star 4P
ND1/4
B 2
Star 6P
ND 1/16 C 3
Soft focus
ND 1/64 D 4
Security and Access
1 Smart card slot
Insert your smart card into this slot with the chip on the
card facing the front of the camera. Push the card
home until it fits snugly.
There are two types of card; an owner card and a user
card. Both cards store operator files and scene files.
The owner card can be used to change the user level
of the camera. The user level determines which set of
controls and functions can be changed by the camera
operator. Refer to Section 6 for more information on the
smart card.
A smart card is not required for normal operation of the
camera.
Note
Only use an original Thomson camera card.
Store the owner card in a safe place.
Power Supply
Power switch
The power switch has two positions:
On : Power to camera is switched on.
Off: Power to camera is switched off.
When you switch off the power, the access rights that
were obtained by the use of the PIN code are disabled
and the camera starts at the assigned user level when
switched on again.
1
1
LDK 100 Series
Clear Clear A 1
Star 4P
ND1/4 B 2
Star 6P
ND 1/16 C 3
Soft focus
ND 1/64 D 4
1