Roberts Radio CR9977 User Manual

Page 17

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

Changing the back-up battery

1. Purchase a replacement lithium backup battery type CR2032 or

equivalent.

2. Remove the new battery from its packaging so that it is ready to

install.

3. Important: Maintain connection to AC mains supply during battery

replacement. This will provide power whilst the original battery is
removed.

4. Use a small screwdriver to remove the small screw securing the

battery holder on cabinet base.

5. Remove the battery holder from cabinet.

6. Remove old battery from holder. Replace new battery with

sign

facing direction shown in drawing opposite.

7. Replace the holder into cabinet back.

8. Refit the small screw to secure holder.

9. Check that the 'Battery low' indicator is not lit.

cr9977 instruction book issue 2.PMD

3/16/2006, 2:09 PM