Riverstone Networks OmniStack 6200 - Manual (Page 6)

F E AT U R E S
6 Alcatel-Lucent | Alcatel-Lucent OmniStack 6200
Simplified manageability
■ Dual image and multiple configuration file storage provides backup
■ Industry standard CLI with a familiar interface reduces training costs
■ Easy-to-use point-and-click web based element manager with built-in help for easy
configuration of new technology features
■ Remote telnet management or secure shell
■ Port based, port mirroring for troubleshooting
■ Human readable ASCII-based config files for offline editing and bulk configuration
■ IGMPv1/v2/v3 snooping to optimize multicast traffic
■ IGMP querier for non-routed multicast network configuration
■ BootP/DHCP client allows auto-config of switch IP information to simplify deployment
■ Auto-negotiating 10/100/1000 ports automatically configure port speed and duplex setting
■ Auto MDI/MDIX automatically configures transmit and receive signals to support straight thru
and crossover cabling
■ SNMPv1/v2/v3
■ Supports RFC 2819 RMON group (1-Statistics, 2-History, 3-Alarm & 9-Events)
■ Simple Network Time Protocol (SNTP) for network wide time synchronization
■ Alcatel-Lucent Mapping Adjacency Protocol (AMAP) for building topology maps
within OmniVista
■ IEEE 802.1ab (LLDP) and LLDP-MED extensions for network discovery, topology and easier
VoIP deployment
■ Virtual cable tester provides switch-based integrity testing on copper Ethernet cabling
■ Event logging and remote SYSLOG support
VLAN support
■ 255 VLANs
■ 4,094 VLAN tag value support
■ Per port, 802.1Q, MAC, IP subnet and protocol VLAN
■ Per service VLAN stacking (Q-in-Q) with per port and inner VLAN classification
■ Multicast TV VLAN registration per port for maximum bandwidth efficiency between edge
and core.
High availability
■ 802.1w rapid recovery spanning tree allows sub-second failover to redundant link
■ 802.1d spanning tree for loop free topology and link redundancy
■ 802.1s multiple spanning tree
■ Fast forwarding mode on user ports to bypass 30-second delay for spanning tree
■ Static and 802.3ad dynamic link aggregation that supports automatic configuration of link
aggregates with other switches.
■ Broadcast storm control
■ Redundant 1:1 power
■ Fault tolerant loop stack topology
Quality of service
■ 802.1p, TOS, DSCP marking
■ QoS mapping: 802.1p to TOS/DSCP, TOS to 802.1p/DSCP, DSCP to 802.1p/TOS
■ Classification per port, 802.1p(COS) value, MAC SA/DA, Ethertype, TOS precedence, DSCP
value, ICMP code and type, IP SA/DA, IP protocol, TCP/UDP port
■ Classification per inner VLAN for VLAN stacking configuration
■ Four egress queues per port that support strict and WRR queuing algorithms
■ Ingress bandwidth rate limiting per port/flow
■ Egress bandwidth rate limiting per port/queue