Peripheral devices – Russound PR-4Zi User Manual
Page 18
18
Peripheral Devices
PRC -1 REMOTE CONTROL
The Russound PRC-1 remote control is prepro-
grammed to operate more than 1,000 audio and
video components, including the PR-4Zi. Set it up by
simply punching in a three-digit code that matches
your equipment. The PRC-1 also has the ability to
learn new functions, allowing you to customize it and
update it as you add new equipment. The PRC-1
operates up to eight different audio and video com-
ponents in a home entertainment system.
The PRC-1 controls only the local zone you are in.
USING THE PRC -1 WITH THE PR-4Zi
To activate the PRC-1 for use with the PR-4Zi:
1. Turn on the PR-4Zi using its front-panel switch.
2. On the PRC-1, press the AUX and MUTE buttons
simultaneously, then release.
3. Point the PRC-1 toward the PR-4Zi and press the
three-digit code 0-8-1.
4. On the PRC-1, press the AUX button again to
store the code.
5. Henceforth, pressing the AUX button on the PRC-
1 accesses all the preprogrammed codes for the
PR-4Zi.
All the functions available on the PCK keypad are
also available on the PRC-1. NOTE: The PRC-1 can
turn on the local zone by pressing the POWER but-
ton, and turn off that zone by pressing the MUTE
button.
TUNER
CD
TAPE
VID 1
VID 2
DVD
ALL ON
SYSTEM
ON
SYSTEM
OFF
ALL OFF
PRESET
SHIFT
SLEEP
PRO.L
3.CH
TEST
BASS
TREBLE
TUNER
TAPE
CENTER
REAR
CENTER DELAY
SURR
Ld
PIP
PRC-1
PROGRAMMABLE REMOTE CONTROL
CBL
VCR
TV
SAT
AUX
DVD
CD
AUD
POWER
MUTE
GUIDE
PAUSE
SEL
R
E
W
F
•
F
PLAY
STOP
MENU
EXIT
1
2
3
4
5
6
7
8
9
FAV
INFO
NEXT
+10
M1
M2
M3
M4
0
ENTER
ALT
PRE.
CH
T/V
VOL
CH
LIGHT
Figure 19 – PRC-1 Preprogrammed
& Learning Remote Control
PR-4Zi manual 6/18/02 12:58 PM Page 18