Royal Sovereign ARP-9009TL - Manual (Page 9)

arp-9009tl / 9011tl
9
on /oFF
The power control button turns the unit on and off. When you press the button, the unit begins to operate.
Mode
∙Select∙the∙functions∙of∙the∙unit∙for:∙AUTO∙control,∙COOL,∙DRY,∙and∙FAN.
The∙appliance∙will∙start∙on∙AUTO∙function∙the∙first∙time∙it∙is∙turned∙on∙and∙remains∙in∙this∙mode∙until∙other∙type∙of∙programming∙is∙chosen.
aUto (automatic functioning key)
Press∙MODE∙key∙to∙select∙∙AUTO,∙your∙portable∙air∙conditioner∙will∙select∙an∙ideal∙temperature∙for∙the∙room∙while∙running∙at∙an∙optimal∙level.∙ is shown on the display and the
indicator light will come on. The fan speed will be determined by the machine.
cool
Press the Mode Control button to select Cool mode. The light will show on the display.
The unit displays “present room temperature.” The temperature range settings are between 64~88 °F
In Cool mode, use the < or > button to adjust and set the desired temperature for the room. After 3 seconds the display will return back to the present room temperature.
note: The∙air∙exchange∙hoses∙must∙be∙vented∙through∙the∙window∙kit∙when∙it∙is∙in∙this∙mode.∙The∙compressor∙will∙start∙after∙3∙minutes∙(during∙which∙only∙the∙fan∙function∙is∙
active).∙If∙the∙room∙temperature∙is∙lower∙than∙selected,∙the∙appliance∙activates∙the∙fan∙function∙until∙the∙temperature∙rises∙above∙the∙the∙temperature∙that∙was∙set.
dry
Press∙the∙Mode∙Control∙button∙to∙select∙Dry∙(dehumidify)∙mode.∙The∙ light will show on the display.
When the Dehumidify mode is on, the temperature buttons do not function. The fan speed can be adjusted only if the temperature in the room is higher then 77 ° F. If it is below
this∙temperature,∙the∙fan∙speed∙is∙automatically∙fixed∙to∙“low”∙and∙cannot∙be∙adjusted.∙The∙compressor∙will∙be∙on∙for∙10∙minutes∙and∙then∙turn∙off∙for∙4∙minutes∙in∙this∙mode.∙∙This∙
prevents∙the∙coils∙from∙freezing∙and∙protects∙the∙air∙conditioner.∙∙When∙the∙humidity∙in∙the∙room∙is∙50%∙or∙lower,∙the∙compressor∙will∙not∙run∙and∙the∙unit∙will∙not∙dehumidify.
note :∙The∙exhaust∙hose∙must∙be∙connected∙to∙remove∙the∙humidity.∙∙
Fan
Press the Mode Control button to select Fan mode. The light will show on the display. The air is circulated throughout the room with no cooling.
note:∙The∙exhaust∙hose∙is∙not∙needed∙in∙fan∙mode∙as∙it∙is∙circulating∙the∙air∙that∙is∙in∙the∙room.
Speed
Press∙“SPEED”∙key∙to∙adjust∙fan∙speed∙(High/∙Low).