Roberts Radio CD9912 - Manual (Page 15)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Checking a programme
1. Whilst the CD is in STOP mode, repeatedly press and release the
Prog. button to step through the programme. The display will show
the programme and track numbers.
2. Press the Play/Pause button to commence playback of the
programme.
Changing a programme
Adding tracks to the programme
1. Repeatedly press and release the Prog. button until the display
shows the first empty memory location (00 under track).
2. You can now add track to the programme as described earlier (max
20 tracks).
Replacing previously programmed tracks
1. Repeatedly press and release the Prog. button until the display
shows the memory location you wish to replace.
2. Select the new track using the B.skip or F.skip buttons.
3. Store the track by pressing the Prog. button.
4. Press the Play/Pause button to commence playback of the
programme.
Prog
Play / Pause
Prog
Prog
UP/
F.Skip
DOWN /
B.Skip
Prog Play / Pause
14
cd9912 instruction book.PMD 4/21/2004, 11:15 AM 15