Ryobi 240RJ - Manual (Page 2)

2
– English
Symbols
SYMBOL EXPLANATION
WARNING! Clearing saws,
brushcutters and trimmers can be
dangerous!
Careless or incorrect use can result in
serious or fatal injury to the operator or
others.
Read through the Operator‘s Manual
carefully and understand the content
before using the machine.
Always use
• A protective helmet where there is a
risk of falling objects
• Ear protection
• Approved eye protection
Checks and/or maintenance should be
carried out with the engine switched off,
with the stop switch in the STOP
position.
Always wear approved protective gloves.
Regular cleaning required.
Ocular control.
Approved eye protection must always be
used.
Max. speed of output axle, rpm
This product is in accordance with
applicable CE directives.
Beware of thrown objects and
ricochets.
50FT
15 m
50FT
15 m
Only use non-metallic, flexible cutting
elements, that is trimmer head with
trimmer cord.
Use anti-slip and stable boots.
Always wear approved protective gloves.
Only intended for the trimmer head.
The operator of the machine shall
ensure, while working, that no persons
or animals come closer than 15 metres.
Blade can thrust violently when
coming in contact with any object.
Blade thrust can cause amputation of
arms or legs. Keep people and animals
50 feet away. Never use blades unless
recommended handlebar, shoulder
strap, attaching hardware and blade
deflector are installed.
Arrows which show limits for handle
mounting.
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in chapter Technical data and
on label.
10000 rpm
max