Ironing recommendations, Steam ironing, Vertical ironing – Reliable THE DIGITAL VELOCITY V100 User Manual
Page 12

08
To activate this feature, simply keep the steam selector button Fig 2 (i) 
held for 5 seconds.
If	you	do	this,	the	Auto-Pause	symbol	on	the	display	will	blink	for	10	seconds	to	
warn you.
For safety reasons, every time you manually turn the iron off or unplug the iron, 
when the iron is turned back on or plugged back in, it will go back to its default set-
ting (auto shut off activated after 8 minutes). 
 
DO NOT LEAVE yOUR IRON UNATTENDED WHILE THE STEAM READy™ 
FEATURE IS ACTIVATED. 
IRONING RECOMMENDATIONS
Since the working of this model is similar to an ironing station (with separate 
boiler) and due to its strong flow of steam at max. 30 gr/min, we recommend that 
you iron with medium steam at temperature positions 1 and 2, and maximum 
steam	for	temperature	positions	3	and	MAX.	We	also	recommend	that	you	iron	first	
with steam (the level appropriate to the garment you are going to iron) and go 
over the clothes dry to remove the moisture and obtain results comparable with 
professional pressing.
•
To iron without steam, simply do NOT press the steam On/Off switch Fig 2 (g).
•
It is NOT necessary to drain the water tank when dry ironing.
STEAM IRONING
This model enables you to iron with steam at a temperature setting as low as 
position	1	(•).	It	has	two	steam	volume	rates,	med.	15gr/m	and	max.	30gr/m.	
For	more	information	on	the	steam	volume	rates,	refer	to	the	section	“Ironing	
Recommendations.”	
VERTICAL IRONING
•
Keep the steam button pressed to obtain steam during vertical ironing.
•
It	enables	you	to	remove	creases	from	delicate	garments	without	having	to	 
lay them on the ironing board: jackets, coats, curtains, synthetics, etc. 
•
Place the garment on a hanger, away from other garments (& persons).
•
Set	the	temperature	selector	at	position	(••),	(•••)	or	(MAX),	place	the	iron	
in	the	vertical	position	and	press	the	button.	At	position	(••)	you	will	obtain	 
a	more	humid	“white”	steam,	which	will	be	more	visible,	whereas	at	setting	
(•••)	and	(MAX)	the	steam	is	drier	and,	although	the	same	steam	volume	 
is maintained, it will be harder for you to see.
