ROWENTA DG 560 - Manual (Page 4)

DG580 model: Press both on/off switches (A) and (B) so that
the iron light and steam indicator light turn on.
2. When the steam indicator light
turns off (approximately 7
minutes), steam is ready.
3. During ironing the temperature
indicator light for the iron and the
steam indicator light will turn on
and off. This is normal as the
temperature is being regulated.
The unit is still on when these
lights go out.
4. To turn the unit off, press the
switch(es) in the opposite
direction so that the side without
the light is depressed. Unplug
and leave to cool completely
before emptying or putting away.
Set the temperature control dial
on the iron to the minimum
setting before unplugging.
STEAM IRONING
Warning: Never iron or steam clothes while they are
being worn.
DG 560
1. Set the iron’s temperature control dial according to the
type of fabric being ironed.Check the fabric’s label for
appropriate setting and steam recommendations.
2. Once the iron has heated to the proper temperature and
the boiler is ready, the temperature indicator light and
steam indicator light will go out. The iron is now ready for
use.
3. To obtain steam press the steam button beneath the iron
handle. When you release the button, steam will stop.
We recommend pressing and releasing the steam button
at regular intervals of 15 seconds.
With delicate fabrics (
● setting), press the steam
button under that handle intermittently rather than
continuously. This will avoid water droplets from
appearing with the steam.
(A)
(B)
Fabric Temperature
regulator
synthetics ●
e.g. viscose, (low temperature)
polyester
silk, ● ●
wool (medium temperature)
cotton, ● ● ●
linen (high temperature)