Russound SP503.1 - Manual (Page 10)

TECHNICAL SPECIFICATIONS
SP503.1
Frequency Response: 68Hz - 18kHz
Construction: Dual Voice Coil, Dual Drive 5.25" Polymica cone with coni-
cal high frequency driver. Moisture resistant
Sensitivity: 88dB
Min / Max Power: 10 to 60 W/Channel
Impedance: 4 Ohm, 8 Ohm, 16 Ohm (depending on wiring)
Frame: ABS plastic, paintable
Grille: Fine mesh grille, paintable (steel),
Mounting: 4 self-mounting, self-contained clamps
Dimensions: 6.5"OD x 5.25"ID x 3"D
SP522.1
Frequency Response: 65-21,000Hz
Construction: 5.25" Poly cone, Dual voice coil woofer with Butyl rubber
surround. Two 13mm Mylar dome tweeters. Moisture resistant
Sensitivity: 89 dB
Min/Max Power: 10 to 60 W/Channel
Impedance: 8 Ohm
Frame: ABS plastic, paintable
Grille: Fine mesh grille, paintable (steel),
Mounting: 4 self-mounting, self-contained clamps
Dimensions: 6.5"OD x 5.25"ID x 3"D
SP523.1
Frequency Response: 65Hz - 20kHz
Construction: 5.25" Polymica woofer, .5" Neodymium mylar dome swivel
tweeter. Moisture resistant
Sensitivity: 90dB
Min / Max Power: 10 to 60 W/Channel
Impedance: 8 Ohm
Frame: ABS plastic, paintable
Grille: Fine mesh grille, paintable (steel)
Mounting: 4 self-mounting, self-contained clamps
Dimensions: 6.5"OD x 5.25"ID x 3"D
10