Roberts Radio Gemini 49 RD-49 User Manual

Page 12

Dynamic Range Control (DRC) settings - DAB

DRC can make quieter sounds easier to hear when your radio is used in

a noisy environment.

1. Press the

On/Off button to switch on your radio.

2. Press and hold in the Menu/Info button the display will show

“Software.”

3. Press the Tuning Up/Down buttons until the display shows "DRC

value".

4. Press and release the

Select button to enter adjustment mode.

5. Press the Tuning Up/Down buttons to select required DRC setting

(default is 0) .

DRC 0 DRC is switched off, Broadcast DRC will be ignored.

DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.

DRC 1 DRC is set as sent by broadcaster.

6. Press and release the Select button to confirm the setting. The display

will return to normal tuning mode.

Note: Not all DAB broadcasts are able to use the DRC function. If the

broadcast does not support DRC, then the DRC setting in the radio will

have no effect.