Remington BB18125A - Manual (Page 8)

8 www.remingtonpowertoools.com
BLOWER/SWEEPER ASSEMBLY
ASSEMBLING BLOWER
ASSEMBLE BLOWER AS INDICATED
Follow the steps below to assemble the
blower.
1. Slide the blower tube onto outlet on front
of blower/sweeper housing (see Figure 4).
Make sure the tube release button engages
the tube.
Figure 4 - Sliding blower tube into place
To Reduce The Risk of
Personal Injury or Electric
Shock –Remove battery from
power source before assem-
bling or changing attach-
ments.
WARNING
FPO