Riccar BRILLIANCE BRLS - Manual (Page 12)

20 21
When to change filters
At minimum, it’s recommended to replace
the filters after using twelve vacuum bags.
If someone in your household is highly
sensitive to airborne allergens, it is
recommended to change the filter set
after every six vacuum bags.
Replacing the post filter
Note: Your vacuum is equipped with either
an S-Class HEPA filter or an electrostatic
filter. To change either type of filter, follow
the instructions below.
• Open the bag compartment lid and locate
the post filter below the bag.
• Using the tab on the left, remove the used
filter and throw away. NOTE: Filters
cannot be washed and reused.
• When inserting the new post filter, first
position the tabs in the right side of the
casing. Then, snap it into place.
• Close the bag compartment lid.
Replacing the secondary filter
• Open the bag compartment lid and locate
the secondary filter on the left side of the
bag compartment.
• Pull the front tab away from the vacuum
to remove the filter holder.
• Remove and throw away the used filter.
• Insert the new filter. Then reposition the
filter holder back end first and snap into
place behind the tab.
• Close the bag compartment lid.
Maintenance and Care Maintenance and Care