RCA SPS3200 User Manual

Page 2

CLOCK DOES NOT SHOW CORRECT TIME:

• There was a power outage. Set the clock again as described in "Setting the Clock".

CLEANING THE UNIT

• Do not use volatile chemicals on this unit. Clean by lightly wiping with a dry soft cloth.

• Keep the CD Drawer closed to keep dust out of the unit.

CLEANING THE CD

• If the CD skips or will not play, the disc may need to be cleaned. Before playing, wipe the disc from the center outwards with a

clean cloth. After playing, store the disc in its case.

HANDLING THE CD

• Only touch the CD on the edge to avoid finger prints on the underside of the CD.

• Do not stick paper or tape on the underside of the CD, and do not write anything on the underside of the disc.

CD LENS CARE

• When your CD lens gets dirty it can cause the unit to output poor sound quality. To clean the lens you will need to purchase a

CD lens cleaner. For instructions on cleaning the CD lens, refer to the instructions accompanying the CD lens cleaner.

Troubleshooting, Care & Maintenance

1. Press the

TIMER button. The “TIMER” indicator blinks.

2. Press the

/ TUNE + or

/ - TUNE buttons to select

your desired time from 1-99 minutes.

• TIP: Press the TIMER button repeatedly to select following

preset times: 10, 15, 30, 45, 60, 75, 90 minutes. You can

then "fine-tune" your time by using the

/ TUNE + or

/ - TUNE buttons.

• TIP: Press and hold the

/ TUNE + or

/ - TUNE

buttons to fast forward/reverse to desired time.

3. When the preset time elapses, the ALARM will sound.

4. To turn Off the ALARM, press the

TIMER button once.

Otherwise, the ALARM will automatically turn off after 60

minutes if no button is pressed.

Note: Do not press any buttons within 5 seconds after setting

the cooking time, otherwise, the cooking timer will be cancelled.

CANCELLING THE COOKING TIMER

• Press the

TIMER button until the time of the cooking timer

shows "00". The “TIMER” indicator will disappear within 5

seconds.

TIMER

Setting the Cooking Timer

CD Playback

CD PLAYBACK

1. Press the button on the front panel to turn on the unit.

2. Press the

CD·RADIO button to change CD mode.

3. Press the button to open the CD drawer. Place a CD

onto the CD tray with the label side up and then press the

button to close it. The CD will be scanned by the unit and

the total number of tracks will be displayed.

4. Press the

button to start playing the CD. The current

track appears on the display.

Note: During playback, the track number will disappear and the

time will be displayed if no button is pressed within 5 seconds.

• Adjust volume by pressing the VOLUME +/- buttons.

To Pause Playback

• Press the button. The current track

number blinks.

• To resume playback, press the

button again.

To Stop Playback

• Press the button.

To SKIP to a Different Track

• To SKIP to the beginning of the CURRENT track, or any

earlier track, press the

/ - TUNE button.

• To SKIP to the beginning of the NEXT track, or any later

track, press the

/ TUNE + button.

To FAST FORWARD or FAST REVERSE to a Particular

Point

• To scan forward at high speed, press and hold the

TUNE + button and release it at the desired point.

• To scan backward at high speed, press and hold the

/ -

TUNE button and release it at the desired point.

• Fast forward or Fast reverse will continue searching the CD

until it reaches the end.

CD REPEAT PLAYBACK

Repeating the Current Track

• Press the

/ PRESET button until “REPEAT” blinks, the

current track will be played repeatedly.

• Select a desired different track to be repeated by pressing

the

/ TUNE + or

/ - TUNE buttons.

4. To add additional tracks, repeat steps 2 - 3 (up to 20 tracks).

5. To start playback, press the button.

To check the program:

• After setting, press the

button to start playing, then press

the

/ TUNE + or

/ - TUNE buttons to check the

programmed tracks.

To add additional tracks during program playback:

• Press the button, then press the

/ MEM button

repeatedly until the number of the last programmed track

appears and repeat steps 2 - 4 above.

To change the programmed tracks during program

playback:

• Press the button, and press the

/ MEM button

repeatedly to select the number of the program, then press

the

/ TUNE + or

/ - TUNE buttons to alter the track.

Press the

/ MEM button to register the newly programmed

track into memory.

To erase the whole program, do one of the following:

• Press the button twice.

• Press the CD

·RADIO button to change to radio mode.

• Open the CD drawer by pressing the button.

Note: You can use the REPEAT function during program play.

REPEAT

MEMORY

LIMITED WARRANTY

AVC MULTIMEDIA ("AVC") makes the following limited

warranties. These limited warranties extend to the original

consumer purchaser and is limited to non-commercial user of the

product.
One Year Parts & Labor Warranty

AVC products purchased in the United States are warranted to

be free from defects in materials or workmanship for a period of

one year from the date of their original retail purchase. If the unit

fails to conform to this warranty, we will service the product using

new or refurbished parts and products, at

AVC's sole discretion.

During a period of one year from the effective warranty date,

AVC will provide, when needed, service labor to repair a

manufacturing defect at its designated Service Center. To obtain

warranty service in the United States, you must first call our

Customer Support Center at 1- 877- 252 - 6873, during the

hours listed in the box below. The deternination of service will

be made by AVC customer support.
PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT

PRIOR AUTHORIZATION. New or remanufactured replacements

for defective parts or products will be used for repairs by

AVC

at its designated Service Center for one year from the defective

warranty date. Such replacement parts or products are warranted

for an additional one year from the date of repair or replacement.

The Customer will be required to ship the unit to the Service

Center indicated at the time Customer Support is contacted to

make the necessary repairs. The customer is responsible for all

transportation charges to the service facility.
Packaging and Shipping Instruction

When you send the product to the AVC service facility you must

use the original carton box and packing material or an equivalent

as designated by

AVC.

In the event your product requires repair after the limited

warranty period has expired, please contact our Customer

Support Center at

1-877-252-6873 or www.RCAav.com

Hours: Monday-Thursday: 9am-7pm, Friday: 9am-5pm,

Saturday: 9am-NOON Eastern time.
Important:

You are responsible for any transportation, shipping or

insurance relative to the return of the product to our Product

Returns Center.

Important:

Also keep your “Bill of Sale” as proof of purchase.

Model no. ................................ Product name .........................
Type of set .............................. Serial no. ................................
Invoice no. .............................. Date purchased ......................
Dealer name ...........................

FOR SERVICE AND REPAIR, PLEASE VISIT

www.RCAav.com.

Specifications and external appearance are subject to change

without notice.

Your Responsibility

(1) You must retain your bill of sale to provide proof of purchase.

(2) These warranties are effective only if the product is

purchased and operated in the U.S.A. or Canada.

(3) Warranties extend only to defects in material or

workmanship, and do not extend to any product or parts

which have been lost or discarded, or damage to product

or parts caused by misuse, accident, improper operation

or maintenance, or use in violation of instructions provided

with the product, or to product which has been altered or

modified without authorization of

AVC, or to products or

parts thereof which have had the serial number removed or

changed.

Out of Warranty

Limited Warranty

All warranties implied by state law, including the implied

warranties of merchantability and fitness for a particular purpose,

are expressly limited to the duration of the limited warranties set

forth above. With the exception of any warranties implied by state

law as hereby limited, the foregoing warranty is exclusive and in

lieu of all other warranties, guarantees, agreements and similar

obligations of manufacturer or seller with respect to the repair

or replacement of any parts. In no event shall

AVC be liable for

consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized

to change, modify or extend the terms of these warranties in any

manner whatsoever. The time within action must be commenced

to enforce any obligation of

AVC arising under the warranty

or under any statute, or law of the United States or any state

thereof, is hereby limited to one year from the date of purchase.

This limitation does not apply to implied warranties arising under

state law.

This warranty gives you specific legal rights and you may also

have other rights, which may vary from state to state. Some

states do not allow limitation on how long an implied warranty

lasts, when an action may be brought, or the exclusion or

limitation of incidental or consequential damages, so the above

provisions may not apply to you.

For more information on other products and services, please

contact our web site at

www.RCAav.com.

Printed in China

811-329991W010

The unit must be in standby mode. To enter standby mode,

make sure that the unit is plugged in, but not turned on.
1. Press and hold the

/ MEM button until the HOUR digit

blinks.

2. Press the

/ - TUNE or

/ TUNE + button to set the

current hour, then press the

/ MEM button to confirm.

3. Press the

/ - TUNE or

/ TUNE + button to set the

current minutes.

4. Press the

/ MEM button to start the clock. The clock will

automatically start if no button is pressed within 5 seconds.

Note:12-hour system "12:00 PM" = NOON.

Setting the Clock

TUNING IN TO A STATION MANUALLY

1. Press the button on the front panel to turn on the unit.

2. Press the

CD·RADIO button on the unit until TUNER is

displayed.

3. Press the

AM /FM button on the unit to select AM or FM.

4. Press the

TUNE + or

/ - TUNE button to tune in to

a desired station.

Note: When using the radio, the station will disappear and the

time will be displayed if no button is pressed within 5 seconds.

To Quickly Search for a Station

Press and hold the

/ TUNE + or

/ - TUNE button until

the tuner starts searching for a station, then release.

The tuner will stop on the next station.

To Turn Off the Radio

Press the button on the unit to turn the unit off.

SETTING A RADIO STATION PRESET

The unit can store a total of 20 stations in memory (10 FM, 10

AM). Presetting allows you to tune in to a station directly.

1. Press the

CD·RADIO button on the unit to select TUNER.

2. Press the

AM /FM button on the unit to select AM or FM.

3. Press the

/ TUNE + or

/ - TUNE buttons to tune in to

a desired station.

4. Press the

/ MEM button until the “MEMORY” indicator

blinks and the two digits (e.g. "01") blink on the display. The

digits (e.g. "01") indicate the preset station number that will

be used to store your station.

5. If you want to store to a different preset number, simply

press the

/ PRESET button to repeatedly until the

desired preset station number is displayed.

6. Press the

/ MEM button to store the station.

7. Repeat steps 3 to 6 for the next preset.

TUNING IN TO A PRESET RADIO STATION

1. Press the

CD·RADIO button on the unit until TUNER is

displayed.

2. Press the

AM /FM button on the unit to select AM or FM.

3. Press the

/ PRESET button to select a preset station.

Radio

CD Mode
1. During playback, press the

DISPLAY button repeatedly to

shuffle between the CD playback mode and the current time.

2. When stopped, press the

DISPLAY button to shuffle

between the total number of CD tracks and the current time.

RADIO Mode
• Press the

DISPLAY button to shuffle between the current

radio station and the current time.

Display Function

Repeat the Entire CD

• Press the

/PRESET button until

“REPEAT” stops blinking and remains

on.

All tracks will be played repeatedly.

Cancel Repeat Play

• Press the

/PRESET button until “REPEAT” disappears.

CD PROGRAMMABLE PLAYBACK

20 tracks can be programmed to play in a preset order.
1. When the unit is ON and in CD MODE,

make sure the CD is STOPPED. Press

the

/ MEM button. “MEMORY” and “1

” will blink on the display.

2. Press the

/ TUNE + or

/ - TUNE

buttons to select the desired track. For

example, to play track 2 first, the display

would look like this:

3. Press the

/ MEM button to store the track in memory.

REPEAT

Need more help?

Please visit online help at

http://www.RCAav.com